Platform lifts for stairs: inclined lifts that carry a wheelchair

An inclined platform lift, also called a wheelchair platform stairlift, carries a person in a wheelchair up a flight of stairs on a folding platform that runs along a rail. It uses the staircase itself, so it needs no floor space beside the flight. Wessex Lifts prints its PLG7 to travel up to 3m on stairs of 0 - 47 degrees (Wessex Lifts, checked 13 November 2026); Premier Lift Group says its Ascendor goes on straight or curved stairs (Premier Lift Group, checked 13 November 2026). For a home, HMRC lists stair lifts designed for wheelchairs among goods that can be zero rated for an eligible person (HMRC Notice 701/7, checked 13 November 2026); for a business, the building regulations’ guidance treats them as an exception (Approved Document M, checked 13 November 2026).

Last reviewed against its sources: 13 November 2026. Each figure links to the page it was read on.

What to expect from an inclined lift

  • It uses the stairsThe rail runs along the flight, so no floor space beside it is needed.
  • It folds awayAdapt Life prints that the Glide’s platform folds to 300 mm (Adapt Life, checked 13 November 2026).
  • Straight or curvedPremier Lift Group says its Ascendor fits either (Premier Lift Group, checked 13 November 2026).
  • An exception at workFor other buildings the guidance allows one only in exceptional circumstances (Approved Document M, checked 13 November 2026).

Get a quote for a platform lift on stairs

Say how many steps there are, whether it is for a home or a business, and give the postcode. Your details come to SEO Dons Ltd, which publishes Steplift.uk, and we reply by email. Asking binds you to nothing.

What happens next

  1. SEO Dons Ltd, which publishes Steplift.uk, receives what you send by email.
  2. We look at the steps and the kind of lift you describe, then reply by email.
  3. You agree to nothing until you sign a firm’s written quote; for a home with a council grant in view, the council approves the work first.
Add a little about the steps (optional)

Published by SEO Dons Ltd. We don't make, sell or fit step lifts ourselves. We reply by email. See the privacy notice.

Up the flight, not beside it

A step lift and a vertical platform lift rise straight up beside the steps, so they need level ground next to them. An inclined lift instead follows the line of the stairs: a rail is fixed to the wall or to the steps, and a platform travels along it, folding up when it is not in use. It suits a flight too long for a step lift where there is no room for a vertical lift. It is not a stair lift, which carries a person sitting on a seat.

If the climb is only a few steps, a step lift may be simpler; lifts for a few steps sets out what each model is printed to climb.

What makers print

Each row is one maker’s or seller’s figure from its own page on the date shown.

Inclined platform lifts: what each maker or seller prints
Maker or seller, modelKindMost it is printed to climbPrinted sizeRated loadSource
Adapt Life, Elevate Glideinclined platform lift–800 mm wide × 1000 mm long (platform)225 kg(Adapt Life, checked 13 November 2026)
Gartec, Ascendor PLG7 platform stairliftinclined platform lift–800 × 650 mm (platform, smallest of 13 sizes)225 kg(Gartec, checked 13 November 2026)
Wessex Lifts, PLG7 incline platform stairliftinclined platform lift3m of travel along the stairs–225kg standard - 300kg optional(Wessex Lifts, checked 13 November 2026)

A dash means the page we read gave no figure for that column in a form we could quote.

Wessex Lifts adds that its PLG7 bridges the gap between stairlifts and platform lifts, travels at 150 mm / second, is battery powered with emergency lowering, suits outdoor use and comes in 10 platform variants (Wessex Lifts, checked 13 November 2026). Adapt Life offers its Glide, for straight staircases, with platform sizes from 700mm x 750mm to 800mm x 1250mm (Adapt Life, checked 13 November 2026). Premier Lift Group says its Ascendor carries up to 250KG and suits most external or internal environments (Premier Lift Group, checked 13 November 2026). Gartec says its Ascendor PLG7 is designed for straight flights of stairs, including those leading to a landing, and suits homes and public buildings (Gartec, checked 13 November 2026); it prints 13 platform sizes, from 800 × 650 mm to 1300 × 800 mm (Gartec, checked 13 November 2026), and a 24V battery drive (Gartec, checked 13 November 2026).

Space on the stairs, and at each end

Three measurements matter. The first is the platform itself: Adapt Life describes the Glide’s standard platform as 800 mm wide × 1000 mm long, or 1445 mm long with its ramps lowered (Adapt Life, checked 13 November 2026). The second is the folded size, which decides how much of the staircase is left for people walking: Gartec gives a folded space requirement of 255–315 mm for its PLG7 (Gartec, checked 13 November 2026). The third is the space at the top and the bottom, where a wheelchair has to roll on, turn and roll off. Photograph both landings, and the stairs from each end, for the supplier.

The slope and the fixings matter too. Wessex prints its PLG7 for staircase gradients of 0 - 47 degrees (Wessex Lifts, checked 13 November 2026), and Gartec gives an inclination of 6–47°, with up to 50° optional (Gartec, checked 13 November 2026). Stannah says that, depending on building restrictions, its wheelchair platform stairlift can be wall-mounted or stanchion floor-mounted, or a mix of both (Stannah Lifts, checked 13 November 2026). Ask any supplier for the steepest stair its model is made for, and whether a turn or a landing part-way up changes the price.

The standard they are built to

BSI lists BS EN 81-40:2020 as current, and under review, for stairlifts and inclined lifting platforms intended for persons with impaired mobility, including wheelchair platforms moving in an inclined plane; it replaced the 2008 edition, which is withdrawn (BSI, checked 13 November 2026). Ask a supplier which standard its model is built to and for the declaration of conformity.

For businesses
Where the guidance allows one

Approved Document M volume 2, for buildings other than dwellings, treats a wheelchair platform stairlift as an exception. It may be considered in exceptional circumstances in an existing building, provided it does not conflict with the means of escape; it should only be considered for conversions and alterations where a passenger lift or a lifting platform cannot practicably be installed; and it is only suitable where users can be instructed in its safe use and management supervision can be ensured. The document gives a minimum clear platform of 800mm wide and 1250mm deep, and controls designed to prevent unauthorised use (Approved Document M, checked 13 November 2026). Stannah prints the same size on its own page: “To meet Part M of the building regulations an 800mm x 1250mm platform size is required.” (Stannah Lifts, checked 13 November 2026)

A business pays for it like any other lift: HMRC’s notice says goods and services used for business purposes are not eligible for the VAT relief (HMRC Notice 701/7, checked 13 November 2026), and the council grant is for changes to a disabled person’s home (GOV.UK, checked 13 November 2026). The wider duties are on platform lifts for shops and businesses.

For homes
VAT and the council grant

HMRC’s notice lists “a stair lift or a chair lift designed for use in connection with a wheelchair” among the goods a supplier can zero rate for an eligible person, adding that the lift does not have to carry the person while they sit in the wheelchair (HMRC Notice 701/7, checked 13 November 2026). The supplier needs a written declaration from the buyer; HMRC does not issue an exemption certificate (HMRC Notice 701/7, checked 13 November 2026).

The government’s guidance to councils in England says help with larger items such as stairlifts and through-floor lifts, which may need structural work, is normally provided through the Disabled Facilities Grant (government guidance to councils, checked 13 November 2026), and GOV.UK gives a stairlift as an example of improving access to rooms and facilities (GOV.UK, checked 12 November 2026). Neither names an inclined platform lift, so the council decides after its assessment, and nothing should be ordered before it approves the grant (GOV.UK, checked 12 November 2026). The rest is on grants and VAT for home step lifts and step lifts for homes.

Prices

Adapt Life’s Glide page shows £7,313.00, with installation quoted separately and VAT not stated in the text we saved (Adapt Life, checked 13 November 2026); its collection page lists the Glide from £7,313.00 among six Elevate models (Adapt Life, checked 13 November 2026). Wessex Lifts, Gartec and Premier Lift Group print no price for their inclined lifts on the pages we read (Gartec, checked 13 November 2026), and Stannah says the cost of a platform stairlift can only be defined once the final specification is agreed, naming the number of curves, the staircase length and the fixing requirements as what affects it (Stannah Lifts, checked 13 November 2026). Every printed figure is on step lift cost.

Looking after it

Otis UK says servicing should follow the maker’s recommendations and any legal or insurance requirements (Otis UK, checked 13 November 2026). An inclined lift has a rail, a carriage and folding parts to check; ask what a service covers and what it costs after the warranty, and see servicing and LOLER for lifts used at work.

Questions about inclined lifts

A flight of stairs, not a few steps?

Say how many steps the flight has, whether it is straight or turns, and whether it is at a home or a business.

Get a step lift quote

Get a step lift quote